2005 DAEWOO Puma 240L CNC Lathe #8396 #1
Have one to sell?
ConditionUsed
1 available
$19,500.00 USD
2005 DAEWOO PUMA 240L used CNC slant-bed lathe features a 22.4" swing, 23.6" machining length, 8" chuck, and 2.6" bar capacity. Equipped with 25 hp, it offers up to 6,000 RPM and a turning diameter of 16.5". Ideal for precision machining tasks.
2005 DAEWOO Puma 240L CNC Lathe #8396 #1
SPECIFICATIONS:
MAX SWING.................... 22.4"
MAX CUTTING DIAMETER......... 16.5"
MAX CUTTING LENGTH........... 25.5"
X-AXIS TRAVEL................ 9.52"
Z-AXIS TRAVEL................ 26.77"
CHUCK SIZE................... 10"
BAR CAPACITY................. 3"
SPINDLE BORE................. 3.54"
SPINDLE NOSE................. A2-8
SPINDLE MOTOR................ 30 hp
SPINDLE SPEED................ 3,500 RPM
RAPID TRAVERSE RATE X-AXIS... 944 in/min.
RAPID TRAVERSE RATE Z-AXIS... 944 in/min.
TURRET POSITIONS............. 12
EQUIPPED WITH:
FANUC SERIES 21i-TB CNC CONTROL
10", 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE HYDRAULIC TAILSTOCK
AUTOMATIC TOOL PRESETTER
TURBO SYSTEMS CHIP CONVEYOR
COOLANT SYSTEM
ASSORTMENT OF TOOLHOLDERS
** AS OF SEPTEMBER, 2026 - RUN TIME: 2,468 HOURS
** UNDER POWER, READY FOR IMMEDIATE INSPECTION & PURCHASE
2005 DAEWOO PUMA 240L used CNC slant-bed lathe features a 22.4" swing, 23.6" machining length, 8" chuck, and 2.6" bar capacity. Equipped with 25 hp, it offers up to 6,000 RPM and a turning diameter of 16.5". Ideal for precision machining tasks.
2005 DAEWOO Puma 240L CNC Lathe #8396 #1
SPECIFICATIONS:
MAX SWING.................... 22.4"
MAX CUTTING DIAMETER......... 16.5"
MAX CUTTING LENGTH........... 25.5"
X-AXIS TRAVEL................ 9.52"
Z-AXIS TRAVEL................ 26.77"
CHUCK SIZE................... 10"
BAR CAPACITY................. 3"
SPINDLE BORE................. 3.54"
SPINDLE NOSE................. A2-8
SPINDLE MOTOR................ 30 hp
SPINDLE SPEED................ 3,500 RPM
RAPID TRAVERSE RATE X-AXIS... 944 in/min.
RAPID TRAVERSE RATE Z-AXIS... 944 in/min.
TURRET POSITIONS............. 12
EQUIPPED WITH:
FANUC SERIES 21i-TB CNC CONTROL
10", 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE HYDRAULIC TAILSTOCK
AUTOMATIC TOOL PRESETTER
TURBO SYSTEMS CHIP CONVEYOR
COOLANT SYSTEM
ASSORTMENT OF TOOLHOLDERS
** AS OF SEPTEMBER, 2026 - RUN TIME: 2,468 HOURS
** UNDER POWER, READY FOR IMMEDIATE INSPECTION & PURCHASE
We use cookies to improve your experience. Privacy Policy.