2002 Kent ERL-13X40 Engine Lathe #7559 #1

2002 Kent ERL-13X40 Engine Lathe #7559 #1

From estate sale. Very clean, barely used Kent lathe. Not sure why but has a Baldor 2 hp motor instead of 5 hp listed on specifications for this model. Does not have high / low switch either.
So only 8 spindle speeds available currently.

SPECIFICATIONS:
Swing Over Bed: 13 3/8″
Swing Over Cross Slide: 8 1/4″
Swing Over Gap: 20″
Width of Bed: 9″
Distance Between Centers: 40″
Cross Slide Travel: 7″
Top Slide Travel: 4″
Spindle Speeds: 50 – 2,750 RPM (16 Steps)
Through Hole Diameter: 1 9/16″
Spindle Nose: ASA D1-4 Camlock
Spindle Bore Taper: MT # 5
Thread (Standard): 45 TPI
Thread (Metric Pitch): 39mm
Longitudinal Feed: 0.0016″ – 0.046″
Cross Feed: 0.001″ – 0.0375″
Lead Screw Diameter: 1 1/8″
Threading Pitch: 4 TPI
Quill Travel: 4″
Quill Diameter: 2″
Quill Bore Taper: MT # 3
Motor: 5 HP

EQUIPPED WITH:
Face Plate
(2) Chucks
Aloris Tool Holder
Steady Rest
Tailstock
Coolant