2017 Supertec G38P-60NC Universal Cylindrical Grinder #7337

2017 Supertec G38P-60NC Universal Cylindrical Grinder #7337

SPECIFICATIONS:

GENERAL CAPACITY
Distance Between Centers: 24"
Swing Over Table: 15"
Max. Grinding Diameter: 14"
Max. Load Held Between Centers: 330 lbs

WHEELHEAD
Hand feed travel: 7.8"
Auto incremental infeed (NC) 0.0001" ~ 0.0999"
Handwheel per division: 0.0002"
Handwheel per revolution: 0.08"
Infeed travel: 9.6"
Top slide sliding travel: 7"
Swiveling angle (R&L): 30
Automatic rapid travel: 1.75"

GRINDING WHEEL
Diameter x Width x Bore: 16" x 2" x 5"
Wheel speed: 1650 rpm

TABLE
Swivelling angle (R&L): 7 Degrees
Traverse speed (infi variable): 1.2"~275"/min
Handwheel per revolution: 0.39"

WORKHEAD
Swiveling angle (R&L): 90
Center taper: MT4 (option MT5, 5C)
Spindle speed (infi variable): 30~350 rpm

TAILSTOCK
Center taper: MT4 (option MT5)
Quill travel: 1"

INTERNAL GRINDING SPINDLE
Spindle speed:G32P/G38P 12000/18000 rpm or 25000 rpm
Max. grinding bore: 4.33" or 2.17"
Max. chucking length: 8"~12.4"
Max. chucking diameter: 6"

MOTOR
Wheel spindle motor: 7.5HP(4P)
Workhead motor: 2HP(4P)
Hydraulic pump: 2HP(4P)
Coolant pump: .25HP(2P)
Internal grinding motor: 2HP(2P)

MACHINE
Net weight: 10340 lbs
Gross weight: 11220 lbs
Packing dimension: 119"x90"x79"(L x W x H)

STANDARD FEATURES:
- Mitsubishi PLC control uses a menu-driven
LCD touch screen - it is easy to learn and easy
to set-up. Simply fill in the blanks to set
the total grinding amount, rough increment,
fine increment, spark-out passes, feeding direction,
parking position, and retracting clearance - then
press cycle start to complete an automatic
grinding cycle.