TRAK DPM RX5

Table size – 50″ x 12″

T-slots (number x width x pitch) – 3 x .63″ x 2.52″

Travel (X, Y, Z axis) * – 40″ x 20″ x 25.81″

Quill diameter – 3 15/16″

Maximum quill travel – 5″

Spindle taper – 40 Taper

Spindle speed range – RPM 40 – 600, 300 – 5000

Spindle center to column face – 20″

Head swivel (side to side) – +/- 90°

Quill feeds per revolution of spindle – 0.0015/0.003/0.006″

Spindle motor HP (vari-speed head) – 5 HP

Power requirements – machine/control – 200-240V, 3P, 35A

Maximum weight of workpiece – 1760 lbs.

Height of table from bottom of bed – 40″

Max spindle nose to table – 25.81″

Min height – 87.5″

Max height – 102″

Width of machine including table – 94.13″

Length with electrical door closed – 82.5″

Length with electrical door open – 103″

Overall width incl full table traverse – 131.06″

Footprint of machine – 24″ x 48.4″

Weight net / shipping lbs. – 4400 / 4700

Rapid traverse X, Y, Z – 400 IPM on X and Y, 250 IPM on Z

Coolant capacity – 10 gallons

Drilling max capacity in mild steel – 1″ dia.

Milling max capacity in mild steel – 5 inch3/min

Tapping max capacity in mild steel – 8-Jan