Southwestern Trak TRL 2470SX Toolroom Lathe 2015 SLX Control #5975

Used Southwestern Trak TRL 2470SX Toolroom Lathe 2015 SLX Control in excellent condition.

- 24″ swing, 70″ between centers
- Generous 4.09″ spindle through hole
- 15 HP continuous spindle motor
- Geared head for good performance at low speeds
- Tapered roller bearings
- High (aluminum) and low (steel) speed range settings
-

SPECIFICATIONS:

- Height of Centers- 12″
- Distance between centers- 70″
- Swing over bed – 24″
- Swing over saddle wings – 24″
- Swing over cross slide – 14.5″
- Cross slide travel – 12.5″
- Tool section max – 1″
- Coolant – 15 gal.
- Bed Width – 14.57″
- Bed Height – 15″
- Spindle Nose – D1-8
- Spindle through hole – 4.09″
- Spindle Taper – MT #8
- Taper in reduction sleeve – MT #5
- Spindle diameter front bearing – 5.51″
- Number of bearings – 2
- Bearing Class (Radial Runout) – Normal
- Number of Spindle Speed Ranges – 2
- Spindle Speed Range (RPM) – 40-670, 100-1800
- Spindle HP – 15

- Power requirements, control – 110V; 1P; 12 A
- Power requirements, machine – 220V;3P;60Hz
- Amps Full Load Current – 42
- Dimensions net – 129 x 60 x 77″
- Dimensions shipping – 134 x 64 x 77″
- Weight net – 6500 lbs.
- Weight ship – 6900 lbs.
- Tail stock quill travel – 8.5″
- Quill diameter – 3.5″
- Quill taper hole – MT#5
- Coolant pump motor – 1/8 HP
- Dynamic spindle motor brake
- Way surface hardness – 480-560 HB
- Quiet operation
- Dual sliding doors to control chips and coolant with one door removable
- Meehanite cast monolithic base
- Heavy ribbed base construction
- Bedways hardened and ground
- Sliding surfaces Turcite coated
- Dovetails on cross slide, V-ways on saddle
- Adjustable saddle gibs
- Maximum rapid X, Z – 100, 250 IPM