FADAL 8030 80"X, 30"Y, 30"Z, 22.5 HP, Rigid Tapping, High Torque Spindle, #4016

Specifications:
Table Size...........................82.5" x 30"
Travels:
X....................................80"
Y....................................30"
Z....................................30"
Floor To Tabel Surface...............36"
Max Weight On Table..................3,751 LBS
Spindle Torque.......................220 ft-lbs
Axis Drive Motors....................5,000 lbs Thrust (X,Y,Z)
Rapid Feed Rate......................400 IPM (X,Y,Z)
Spindle To Table.....................5.5" - 35.5"
Spindle To Column....................30"
Spindle Power........................22.5 HP
Spindle Speeds.......................40 - 10,000 RPM
Spindle Taper........................#40
Automatic Tool Changer Positions.....30
Air Requirements.....................80 psi, 15 scfm
Dimesions............................209" x 103" x 119"
Weight...............................18,000 lbs
Electrics............................230v, 3ph, 40 amps
Equipped With:
Rigid Tapping
High Torque Spindle
High Perfomance Axis Motors
Box Ways
422k Memory Expansion
32 bit Control
High Speed CPU
Graphics
Two Speed Gearless Drive System
Work Lamp
X: 80"
Y: 30"
Z: 30"
Weight: 18,000 lbs
Division: Metalworking
Dimesions: 209" x 103" x 119"
Electrics: 230v, 3ph, 40 amps
Table size: 82.5" x 30"
Spindle power: 22.5 HP
Spindle taper: #40
Spindle speeds: 40 - 10,000 RPM
Spindle torque: 220 ft-lbs
Rapid feed rate: 400 IPM (X,Y,Z)
Air requirements: 80 psi, 15 scfm
Spindle to table: 5.5" - 35.5"
Axis drive motors: 5,000 lbs Thrust (X,Y,Z)
Spindle to column: 30"
Max weight on table: 3,751 LBS
Floor to tabel surface: 36"
Automatic tool changer positions: 30