Used CROWN L1060 OKUMA, OSP700L CONTROL, 8" CHUCK, PROGRAMMABLE TAILSTOCK, 4, 200 RPM, #4083 in Pomona, CA

Specifications:
Swing Over Bed..............21.65"
Swing Over Cross Slide......15.75"
Max. Turning Diameter.......10.63"
Max. Turning Length.........19.68"
X-Axis Travel...............7.28"
Z-Axis Travel...............20.47"
X-Axis Rapid Traverse.......590 ipm
Z-Axis Rapid Traverse.......787 ipm
Spindle Bore................2.2"
Spindle Nose................A2-6
Spindle Speeds..............75 - 4,200 RPM
Spindle Power...............15 HP
Turret Stations.............12
Turret Index Time...........0.2 sec
Tailstock Taper.............#5 MT
Tailstock Quill Stroke......4.72"
Electrics...................220v, 3ph
Dimensions..................104" x 70" x 70", 10,000 lbs
Equipped With:
OKUMA OSP700L Control
8" Chuck
Programmable Tailstock
RS-232 Port
Coolant
Manuals
Division: Metalworking
Electrics: 220v, 3ph
Dimensions: 104" x 70" x 70", 10,000 lbs
Spindle bore: 2.2"
Spindle nose: A2-6
Stock_number: 4083
Spindle power: 15 HP
X-axis travel: 7.28"
Z-axis travel: 20.47"
Spindle speeds: 75 - 4,200 RPM
Swing over bed: 21.65"
Turret stations: 12
Turret index time: 0.2 sec
Max. turning length: 19.68"
Max. turning diameter: 10.63"
X-axis rapid traverse: 590 ipm
Z-axis rapid traverse: 787 ipm
Swing over cross slide: 15.75"