CONRAC 244RH 4", Right Hand Bend, 24" Bend Radius, 180 deg. Max Bend Angle

Specifications:
Tube Capacity...........4-1/2" O.D. x 0.312 W.T. x 2D CLR.
Pipe Capacity...........4" IPS x Sched. 80 x 2D CLR.
Bend Direction..........Right Hand
Bend Radius.............24" Centerline Max.
Bend Angle..............180 deg. Max (195 deg of Arm Travel)
Max Tube Length.........21 ft.
Mandrel Extraction......18" Powered / 6" Rod Adj. (FWD & REV)
Pressure Die Boster.....48" Stroke (FWD & REV)
Indexing Positions......10
Degree of Bend..........1" Increments
Bending Speed...........0 - 2.7 RPM
Hydraulics..............140 Gal, 2,000 psi Continious Duty
Electrics...............25 HP, 220/440v, 3ph
Floor Space.............30' x 86" x 44" (Incl. Sweep Bend Arm)
Weight..................11,500 lbs
Equipped With:
Powered Toggle Acting Clamping & Pressure Die
Universal Type Support Wiper Die Mounting
Push Button Operating Console
Jogging/Manual/Automatic Machine Cycle
Mandrel Extractor
Weight: 11,500 lbs
Floor space: 30' x 86" x 44" (Incl. Sweep Bend Arm)
Division: Metalworking
Electrics: 25 HP, 220/440v, 3ph
Bend angle: 180 deg. Max (195 deg of Arm Travel)
Hydraulics: 140 Gal, 2,000 psi Continious Duty
Bend radius: 24" Centerline Max.
Bending speed: 0 - 2.7 RPM
Pipe capacity: 4" IPS x Sched. 80 x 2D CLR.
Tube capacity: 4-1/2" O.D. x 0.312 W.T. x 2D CLR.
Bend direction: Right Hand
Degree of bend: 1" Increments
Max tube length: 21 ft.
Indexing positions: 10
Mandrel extraction: 18" Powered / 6" Rod Adj. (FWD & REV)
Pressure die boster: 48" Stroke (FWD & REV)