2016 Southwestern Trak FHM 7 Vertical Bed Mill #6995 #1
2016 Southwestern Trak FHM 7 Vertical Bed Mill #6995 #1
Location:Pomona, CA
Description
2016 Southwestern Trak FHM 7 Vertical Bed Mill #6995 #1
SPECIFICATIONS:
Table size – 76″ x 14″
T-slots (number x width x pitch) – 4 x 16mm x 63.5mm
Travel (X, Y, Z axis) – 60″ x 23″ x 20.5″
Quill diameter – 5.06″
Spindle taper – NMTB 40
Spindle speed range RPM – 200-5000
Spindle center to column face – 23″
Spindle motor power – 7.5 HP
Power requirement, control – 110V, 1P, 15A
Power requirement, machine – 220V, 3P, 60HZ
Current, Full Load Amps – 37.5 FLA
Maximum weight of workpiece – 2200 lbs.
Height of table from bottom of bed – 38.25″
Maximum spindle nose to table – 21.5″
Minimum height – 95.5″
Maximum height – 101″
Width of machine including table – 110.5″
Length with electric box door closed – 93.75″
Overall width including full table travel – 171.65″
Overall length with electrical door open – 119.5″
Footprint – 37″ x 62.2″
Way surface – dovetail X axis; square ways Y and Z axis
Weight (approximate) net – 7650 lbs.
Weight (approximate) shipping – 7975 lbs.
Drilling max capacity – 1″ dia.
Tapping max capacity – 5/8″
Milling max capacity – 7 inch3/min
EQUIPPED WITH:
SMX CNC Control
Way surfaces hardened and ground
Turcite coating on all slide ways
Automatic lubrication pump
TRAKing/Electric Handwheels
Specifications
Manufacturer | Southwestern Trak |
Model | FHM 7 |
Year | 2016 |
Condition | Used |
Serial Number | 161CY674 |
Stock Number | 6995 |