2012 Precision Matthews PM-1440ET Engine Lathe 14" x 40" #6929 #1

2012 Precision Matthews PM-1440ET Engine Lathe 14" x 40" #6929 #1
Pomona, CA
Description
2012 Precision Matthews PM-1440ET Engine Lathe 14" x 40" #6929 #1
SPECIFICATIONS:
Headstock center to tailstock center 40 in. max
Swing over bed 14 in. diameter
Swing over cross-slide 8-3/4 in. diameter
Swing over gap 20-3/4 in. diameter
Gap insert length 7-3/4 in.
Spindle face to gap end: 5-1/2 in.
Spindle face to tailstock quill face 44 in. max
Saddle travel 36-1/4 in.
Cross-slide travel 6-1/2 in.
Compound (top slide) travel 3-1/2 in.
Spindle Speeds:
Low range, rpm 50, 70, 95, 140
Mid range 180, 250, 340, 510
High range, rpm 700, 980, 1350, 2000
Carriage drive, thread cutting Leadscrew 8 tpi
Inch threads Choice of 36, from 3 to 56 TPI
Metric threads Choice of 34, from 0.4 mm to 7.2 mm pitch
Longitudinal Feed rates from 0.0026 to 0.0368 in./spindle rev
Cross Slide Feed Rates from 0.0013 to 0.0184 in./spindle revSpindle
Chuck/faceplate attachment D1-5 Camlock
Internal taper MT5-1/2
Spindle bore 2 in. diameter (slightly over, will pass a 2.000″ piece)
Spindle length, LH end to chuck mounting face 15-1/2 in. overall
Spindle length, LH end to chuck face (typical) 19-1/2 in. approx.
Width 70 in. x Height 47 in. x Depth 29 in. (full range cross slide
motion)
EQUIPPED WITH:
Easson ES-8A Digital Readout
2-Way Tool Post
3 & 4 Jaw Chucks
Steady Rest
Tailstock
Coolant
Specifications
Manufacturer | Precision Matthews |
Model | PM-1440ET |
Year | 2012 |
Condition | Used |
Serial Number | 10111532 |
Stock Number | 6929 |