2008 Makino SP43 CNC Electrical Discharge Machine #6922 #1

2008 Makino SP43 CNC Electrical Discharge Machine #6922 #1

SPECIFICATIONS:

X-Axis Travel…………450mm (17.72″)

Y-Axis Travel…………300mm (11.81″)

Z-Axis Travel…………320mm (12.59″)

U/V-Axis Travel…………+/-101mm (3.98″)

Wire Guide…………V-Flat Diamond

Wire Electrode Diameter…………0.2mm, 0.25mm, 0.3mm

Wire Feedrate…………0, 50-360mm/s

Wire Tension…………2-20N (.02-2.0 kgf)

Wire Reel Weight…………20Kg (44 Lbs.)

Rapid Traverse Rate – X,Y,Z-Axis…………2000mm/min.

Rapid Traverse Rate – U,V-Axis…………1000mm/min.

Servo Feed Rate…………0.01 – 50mm/min.

Jog Feed Rate…………50, 150, 600mm/min.

Automatic Wire Threading Unit…………Water Jet

Prepared Hole Diameter – Minimum…………1.4mm/100mm Plate Thickness

Prepared Hole Diameter – Minimum…………0.5mm/30mm Plate Thickness

Prepared Hole Diameter – Minimum…………0.20mm, No Slit,Both Nozzle Closed

Threading Time…………15 Sec. / 30mm Plate Thickness

Threading Time…………Retry 3, 0.20mm, No Angle Cut

Taper Angle (Mechanical) – Maximum…………+/-35 Degrees 100mm Plate Thickness

Position Accuracy…………+/- 0.015mm

Repeatability…………+/- 0.015mm

Table Size…………28.7″ x 22.8″

Table Surface Geometry…………(80) M8 & (38) M6 Taps

Load Capacity – Maximum…………800kg (1,763 Lbs.)

Floor to Table Surface Distance…………970mm (38.2″)

Workpiece Size – Maximum…………28.7″ X 22.8″ X 11.8″

Work Tank Size…………35″ x 33.5″ x 15.9″ (113 Gallons)

Dielectric Supply Tank…………220 Gallons

Clean Tank…………30 Gallons

Dirty Tank…………190 Gallons

Axis Feed Motors – X,Y-Axis…………0.5kw

Axis Feed Motors – U,V,Z-Axis…………0.4kw

Flushing Pump Motors…………(2) 3.0kw

Filter Pump Motor…………0.55kw

Tank Filling Pump Motor…………1.6kw

Circulation Pump Motor…………0.37kw

Dielectric Cooler Compressor…………1.7kw

Machining Current – Maximum…………55A

Machine Dimensions…………112″L X 72″W X 95″H

Filtration Dimensions…………80″L X 39″W X 64″H

Clean Tank Dimensions…………21″L X 24″W X 40″H

Machine Weight with Supply Tank…………6,900 LBS.

EQUIPPED WITH:

MGW-S 15″ Touch Screen Interface

Programmable Auto-Threading, 15-Second Thread Time

Two-Piece “V” Type Wire Guide

HEAT Technology

WireWIZARD CNC Control System with EZ-Cut (WireWIZARD allows for up to 30 percent faster processing speeds over other technologies. Lower consumable and maintenance costs and lower wire feedrates reducing wire consumption without effecting machine accuracy or performance.)

Filtering System, Inside-Out Type Paper Filters X4pcs.

Automatic Power Failure Recovery