Sharp RD-1230 Radial Drill 4' x 12" #6783 #2

Sharp RD-1230 Radial Drill 4' x 12" #6783 #2
Pomona, CA
orCall 909-348-5610
Description
Sharp RD-1230 Radial Drill 4' x 12" #6783 #2
SPECIFICATIONS:
- Diameter of column: 11-13/16"
- Distance from column surface to spindle center, max: 48-1/2"
- Distance from column surface to spindle center, min.: 13-3/8"
- Travel of spindle head: 35"
- Distance from base surface to spindle end, max.: 54"
- Distance from base surface to spindle end, min.: 19-3/8"
- Elevating height of arm: 34-5/8"
- Effective area of table: 27-5/8" x 19-5/8" x 15-3/4"
- Dimensions of base: 67-11/16" x 27-15/16" x 6-1/2"
- Taper hole in spindle: #4 MT
- Stroke of spindle: 9-7/8"
- R.P.M. of spindle (rpm range x steps): 44-1500 x 12 Steps
- Feed of spindle (1PR x steps): 0.002"-0.006" x 3 Steps
- Main motor (HP): 5 HP (2 Speed Motor)
- Elevating motor (HP): 1 HP
- Clamping motor for column and gear-box (HP): 1 HP
- Clamping motor for arm (HP): 1HP
- Coolant pump (HP): 1/8 HP
- Machine height from floor, max. 109-1/2"
- Approximate Dimension (LxWxH): 80" x 39" x 89"
- Approximate Shipping weight: 4,950 Lbs.
- Voltage: 220 or 440V (Must Specify)
EQUIPPED WITH:
- Hardened and Ground Arm Slideways
- Arm Elevation is controlled by Electric Motor
- Safety Device prevents arm from dropping
- T-Slots and Drain Channels on casting
- Hardened and Ground Gears
- Box Table
- Coolant System
- Worklight
- Toolbox
- Wired 220V or 440V. Please Specify.
Specifications
Manufacturer | Sharp |
Model | RD-1230 |
Condition | Used |
Serial Number | 13616 |
Stock Number | 6783 |