Southwestern Trak 2OP-M10 Mini Vertical Machining Center #6763 #2

Southwestern Trak 2OP-M10 Mini Vertical Machining Center #6763 #2
Pomona, CA
Description
Southwestern Trak 2OP-M10 Mini Vertical Machining Center #6763 #2
SPECIFICATIONS:
- TRAK 2op Features:ProtoTRAK TMX CNC
- 8 station tool changer
- X, Y, Z travels: 14” x 12” x 17″
- Footprint of 2.5′ x 4′
- Portable and ships with a pallet jack
- Integrated Jergens™ Ball Lock system
- Simple conversational programming
- BT30 spindle taper
- 3 HP spindle
- 3-axis simultaneous interpolation
- Electronic handwheel
- G code compatible
- Automatic fixture offsets
- Indexer compatible
Machine W x D x H (with head all the way up) – 30.5” x 52” x 101
Min height to fit through doorway – 92”
Table size – 18” x 15”
Number of tee slots and pitch – 4 @ 63 mm
Tee slot width – 0.630” or 16 mm
Max table load – 500 lbs.
Ball Lock ® hold down force – 2250 lbs. @ 35 in/lbs. of torque
Machine Net/Shipping lbs. – 2825/3175
X, Y, Z Travels – 14” x 12” x 17”
Max distance from spindle nose table surface – 20.25”
Min distance from spindle nose table surface – 2.75”
Max swing clearance from spindle center to column – 14”
Max Rapid speed X, Y & Z-axis, inches per minute – 600
Tool holder type – BT30
Spindle nose diameter – 2.2” or 56 mm
Max RPM – 5000
Horsepower – 3HP
ATC Tool Capacity – 8
Max tool Diameter – 2”
Retention Knob – BT30
Air Pressure/CFM – 90 psi, 2.5 at 90 psi
Specifications
Manufacturer | Southwestern |
Model | Trak 2OP-M10 |
Condition | Used |
Serial Number | 133DQ468175 |
Stock Number | 6763 |