Cyril Bath 20 Tons CNC Dual Parts Extrusion Stretch Wrap Forming Press Machine, Model V-20

Used CYRIL BATH CNC HORIZONTAL STRETCH WRAP FORMING PRESS

  Model V-20,  Serial Number M10307,  Mfg. 2003

Over $750,000 new.

SPECIFICATIONS

TWO SET OPPOSING JAWS (TWIN TENSION JAWS)

SHALLOW ARK.

SINGLE PLANE

DISTANCE BETWEEN PRIMARY JAWS:

   Minimum 140" (3,556mm)

   Maximum 168" (4,267.2mm)

DISTANCE BETWEEN SECONDARY JAWS:

   Minimum 68.5" (1,7399mm)

   Maximum 92.5" (2,349.5mm)

TENSION CYLINDER PULL:

   Maximum Pull 20 Tons

   Stroke 12" (304.8mm)

ARM SWING ANGLE: Die stays constant to table.

   Stretch and wrapping around die

   Forward 10 Degrees   Back 35 Degrees

   Total 45 Degrees

SWING ARM: Extended 75⅜" (1,914,53mm)

      Retracted 49-11/16" (1,26206mm)

DIE TABLE: 3 Posts

   Working Surface, Width overall 102½" (2,603.5mm)

   Distance between two Front Posts centers 57½" (1,460.5mm)

   Distance center of two Die Post and Rear Post Die (each side) 35" (889mm)

MOTOR DRIVE: Wired 440 volts, 3-phase

   Hydraulic Pump 100 H.P. 230/460 volts

   Cooler Fan Motor 5 H.P. 230/460 volts

   Oiler Cooler Fan 1½ H.P. 208 / 230 volts

CONTROLS: Window 2000 Operators Interface, QNX Machine Controls.

   Power Supply. Hard Drive , 101 Keyboard.  Color CRT.

REMOTE CONTROL STATION:

   Power On/Off Buttons. Hydraulic On/Off Button.

   Lamp Test Button. Emergency Stop and Reset Buttons.

   Mode Selector Switch: Length / Manual / Auto.

   Load Adjustment Dials. Right and Left Arm Back / Wrap Toggle.

   Right and Left Tension Cylinder In / Out Toggle.

   Left and Right Long Jaw Open / Close Switch.

   Left and Right Short Jaw Open / Close Switch.

COMPLETE FACTORY SAFETY GUARDS

Overall Width 239"(6,070.6mm),  

Front to Back 89⅜" (2,270.13mm), Height 76" (1,905mm) 

Weight 25,000 lbs

Approximate Total Weight 32,000 lbs.